Wheeleze Wheelie Bar Wheels

Group9827

Quick Overview

Wheeleze Wheelie Bar Wheels, Wheeleze are drag racing specific, wheelie bar wheels that have the following properties: first, Wheeleze will not 'push' your car because they always rotate smoothly and evenly. As such, they don't push, dig or skid; they will rotate freely and evenly when others won't or can't. 


Wheeleze Lite-We have been requested to make some thinner, lighter wheels for wheelie bars. They are designed for carbon fiber wheelie bars and other applications where weight and strength are of the most importance. 


Cars that use the wheels ‘harder’ should use the standard Wheeleze wheel as it is of a stronger design and application. It is also designed to help prevent the third member from unloading by absorbing shock. The Lites will not absorb shock in the same manner due to the required different polymer – with long bars this is not an issue but with shorter bars it is very important to help prevent unloading the third member.


If you are on the wheels for more than 100ft. we recommend the standard wheel. Also, we recommend the standard wheel for applications like Pro Mod and Nitro Harley as these are much harder on the wheels. Standard Wheeleze are designed for these applications.

Availability: In stock

Starting at

$69.50

Product Name SKU Price Qty
Wheeleze Wheelie Bar Wheels 1/2" axle bolt x 1.25" wide Wheeleze Wheel Bar Wheel, 4" OD, 1/2" axle bolt x 1.25" wide (one wheel), Each Wheeleze wheel has two self lubricated precision bearings, One wheel has two bearings with a dynamic load rating of over 3000 lbs./ft. One wheel. WHL011
$69.50
Wheeleze Wheelie Bar Wheels 001 Wheeleze Wheel Bar Wheels, 4" OD, 1/2" axle bolt x 1.25" wide (two wheels), Each Wheeleze wheel has two self lubricated precision bearings, Two wheels (four bearings) has a dynamic load capability of over 6,000lbs./ft, two wheels WHL001
$139.00
Wheeleze Wheelie Bar Wheels 3/8" axle bolt x 1.25" wide Wheeleze Wheel Bar Wheel, 4" OD, 3/8" axle bolt x 1.25" wide (one wheel), Each Wheeleze wheel has two self lubricated precision bearings, One wheel has two bearings with a dynamic load rating of over 3000 lbs./ft., 3/8" Bolt with three piece bushing, "3/8" precision anodized spacers are made of 12L14 steel with yellow zinc dichromate finish to resist corrosion. One wheel. WHL012
$77.00
Wheeleze Wheelie Bar Wheels 002 Wheeleze Wheel Bar Wheels, 4" OD, 3/8" bolt x 1.25" wide (two wheels), Each Wheeleze wheel has two self lubricated precision bearings, Two wheels (four bearings) has a dynamic load capability of over 6,000lbs./ft., 3/8" Bolt with three piece bushing, "3/8" precision anodized spacers are made of 12L14 steel with yellow zinc dichromate finish to resist corrosion. Two wheels WHL002
$154.00
Wheeleze Bar Wheels Lite 1/2" axle bolt x .75" Wide Wheeleze Wheelie Bar Wheel Lite - 4" OD, 1/2" axle bolt x .75" Wide, (one wheel), designed for carbon fiber wheelie bars and other applications where weight and strength are of the most importance. One wheel. WHL015
$69.50
Wheeleze Bar Wheels Lite 005 Wheeleze Wheelie Bar Wheels Lite - 4" OD, 1/2" axle bolt x .75" Wide, pair (two wheels), designed for carbon fiber wheelie bars and other applications where weight and strength are of the most importance. Wheeleze Lite is re-engineered for a higher modulus polymer (stronger) and it utilizes a lighter set of bearings. Two wheels WHL005
$139.00
Wheeleze Bar Wheels Lite 3/8" axle bolt x .75" Wide Wheeleze Wheelie Bar Wheel Lite - 4" OD, 3/8" axle bolt x .75" Wide, (one wheel), designed for carbon fiber wheelie bars and other applications where weight and strength are of the most importance. Wheeleze Lite is re-engineered for a higher modulus polymer (stronger) and it utilizes a lighter set of bearings. One wheel. WHL016
$77.00
Wheeleze Bar Wheels Lite 006 Wheeleze Wheelie Bar Wheels Lite - 4" OD, 3/8" axle bolt, .75" Wide, pair (two wheels), designed for carbon fiber wheelie bars and other applications where weight and strength are of the most importance. Wheeleze Lite is re-engineered for a higher modulus polymer (stronger) and it utilizes a lighter set of bearings. Two wheels WHL006
$154.00
Wheeleze Wheel Bar Wheel II 013-one wheel Wheeleze II Wheel Bar Wheel-1/2" Bolt, 4" diameter x 1 1/4" wide. Wheeleze II tensile strength in excess of 10,500 psi and has no compression but retains the additives that allow the wheel to live at extreme centripetal force and it gets another additive that allows the wheel to have an abrasion index of over 550 on a base index of 100... in plain language, you can’t wear them out by running on them at 200 mph for the whole quarter with lots of down force. Wheeleze II are made specifically for three applications: 1. Front Wheel Drive cars apable of trap speeds of greater than 200mph with down force. 2. Nitromethane and methanol dragsters and F/C’s that get into a potential blow over. In these applications the doubled strength of the wheel should allow the car to ‘stay on the wheel’ as opposed to the wheel either being overwhelmed or bending. 3. Pure wheel standing exhibition cars that run the whole quarter mile on the wheelie bar wheels. One Wheel WHL013
$110.00
Wheeleze Wheel Bar Wheel II 003-two wheels Wheeleze II Wheel Bar Wheels-1/2" Bolt, 4" diameter x 1 1/4" wide. Wheeleze II tensile strength in excess of 10,500 psi and has no compression but retains the additives that allow the wheel to live at extreme centripetal force and another additive that allows the wheel to have an abrasion index of over 550 on a base index of 100...in plain language, you can’t wear them out by running on them at 200 mph for the whole quarter with lots of down force. Wheeleze II are made specifically for three applications: 1. Front Wheel Drive cars apable of trap speeds of greater than 200mph with down force. 2. Nitromethane and methanol dragsters and F/C’s that get into a potential blow over. In these applications the doubled strength of the wheel should allow the car to ‘stay on the wheel’ as opposed to the wheel either being overwhelmed or bending. 3. Pure wheel standing exhibition cars that run the whole quarter mile on the wheelie bar wheels, Two Wheels WHL003
$220.00
Wheeleze Wheel Bar Wheel II 014-One Wheel Wheeleze II Wheel Bar Wheels-3/8" Bolt with three piece bushing, 4" diameter x 1 1/4" wide. "3/8" precision anodized spacers are made of 12L14 steel with yellow zinc dichromate finish to resist corrosion, 4" diameter x 1 1/4" wide Wheeleze II tensile strength in excess of 10,500 psi and has no compression but retains the additives that allow the wheel to live at extreme centripetal force and it gets another additive that allows the wheel to have an abrasion index of over 550 on a base index of 100... in plain language, you can’t wear them out by running on them at 200 mph for the whole quarter with lots of down force. Wheeleze II are made specifically for three applications: 1. Front Wheel Drive cars apable of trap speeds of greater than 200mph with down force. 2. Nitromethane and methanol dragsters and F/C’s that get into a potential blow over. In these applications the doubled strength of the wheel should allow the car to ‘stay on the wheel’ as opposed to the wheel either being overwhelmed or bending. 3. Pure wheel standing exhibition cars that run the whole quarter mile on the wheelie bar wheels. One Wheel. WHL014
$117.50
Wheeleze Wheel Bar Wheels II 004-Two Wheels Wheeleze II Wheel Bar Wheels-3/8" Bolt with three piece bushing, 4" diameter x 1 1/4" wide. "3/8" precision anodized spacers are made of 12L14 steel with yellow zinc dichromate finish to resist corrosion, Wheeleze II tensile strength in excess of 10,500 psi and has no compression but retains the additives that allow the wheel to live at extreme centripetal force and it gets another additive that allows the wheel to have an abrasion index of over 550 on a base index of 100... in plain language, you can’t wear them out by running on them at 200 mph for the whole quarter with lots of down force. Wheeleze II are made specifically for three applications: 1. Front Wheel Drive cars capable of trap speeds of greater than 200mph with down force. 2. Nitromethane and methanol dragsters and F/C’s that get into a potential blow over. In these applications the doubled strength of the wheel should allow the car to ‘stay on the wheel’ as opposed to the wheel either being overwhelmed or bending. 3. Pure wheel standing exhibition cars that run the whole quarter mile on the wheelie bar wheels. Two Wheels. WHL004
$235.00

Details

Wheeleze Wheelie Bar Wheels, Wheeleze are drag racing specific, wheelie bar wheels that have the following properties: first, Wheeleze will not 'push' your car because they always rotate smoothly and evenly. As such, they don't push, dig or skid; they will rotate freely and evenly when others won't or can't. 

Wheeleze Lite-We have been requested to make some thinner, lighter wheels for wheelie bars. They are designed for carbon fiber wheelie bars and other applications where weight and strength are of the most importance.

Cars that use the wheels ‘harder’ should use the standard Wheeleze wheel as it is of a stronger design and application. It is also designed to help prevent the third member from unloading by absorbing shock. The Lites will not absorb shock in the same manner due to the required different polymer – with long bars this is not an issue but with shorter bars it is very important to help prevent unloading the third member.

If you are on the wheels for more than 100ft. we recommend the standard wheel. Also, we recommend the standard wheel for applications like Pro Mod and Nitro Harley as these are much harder on the wheels. Standard Wheeleze are designed for these applications.


Additional Information

SKU Group9827
Manufacturer Wheeleze
Hazardous Shipment Cost $0.00
Additional Handling Cost $0.00
Oversize Shipment Cost $0.00

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.


Write Your Own Review

You're reviewing: Wheeleze Wheelie Bar Wheels