<h5 data-fontsize="17" data-lineheight="18">6″ Dry-Sump See Through Filter Assembly with #16 Ports and 115 Micron Element, for running all weight oils up to 70 weight. Designed to be mounted between the Dry-sump oil pump and the oil tank on a #16 scavenge line. Also for applications where the oil tank has a flat bottom and running 60 or 70 weight oil like a lot of super charged funny cars and tractor pullers. Flat bottom unlike tapered bottom tanks particles will settle to the bottom and may not be sucked through the pressure side of the oil pump for inspection. Tapered bottom tanks can run the See Through filter on the pressure side. Black Anodized.</h5>
<ul>
<li data-fontsize="17" data-lineheight="18">Smallest Particles Filtered: 115 Microns</li>
<li data-fontsize="17" data-lineheight="18">Bypass Relief Valve: No</li>
<li data-fontsize="17" data-lineheight="18">Inlet &amp; Outlet Fitting: #16 O-Ring Boss – 1-5/16” – 12 TPI </li>
<li data-fontsize="17" data-lineheight="18">Operating Temp: max 220 degrees Fahrenheit</li>
<li data-fontsize="17" data-lineheight="18">Operating Pressure: max 150 PSI</li>
<li data-fontsize="17" data-lineheight="18">Height: 3.50 in.</li>
<li data-fontsize="17" data-lineheight="18">Width: 6.750 in.</li>
<li data-fontsize="17" data-lineheight="18">Length: 7.750 in.</li>
<li data-fontsize="17" data-lineheight="18">Filter Weight: 6.10 pounds</li>
</ul>
<p>Sold as Kit including; Filter Assembly, 115 Micron Element, and Bracket Kit (**WARNING Filter Nuts and Bracket bolts are shipped un-tightened they need to be tighten before filter is used.**)</p>
<p>Recommended: Extra Filter Element Part # 115-115</p>
<p>Suggested Replacement Parts:</p>
<ul>
<li>Window Part # 105-480 </li>
<li>O-Ring Kit Part # 120</li>
<li>Filter Stud Kit (set of 2) Part # 135</li>
<li>Air Fitting Part # 148</li>
<li>Oil Pressure Port Fitting Part # 169</li>
<li>Block Adapters also available</li>
</ul>