Pro-werks Performance Parts have been developed through years of hands-on precision racing fabrication where only the best components and techniques were acceptable. Located in Mears, Michigan, the Pro-werks name was selected to signify the Professionalism of the company’s high quality standards and the high tech Working Facilities (Werks) of the shops that utilize them. This level of high quality fabrication is typical of race shops, custom airplane builders, and specialty fabrication shops.

From the designers and engineers at Pro-werks, to the experienced machinists and fabricators, we provide the professional and amateur fabricator state-of-the-art products that are designed and built with a “no compromise” attitude. With every product that has the Pro-werks name, you can be sure you are getting the highest quality fabrication component.

Bottle/Bar Mounts                        Wheel Hubs                     Steering Wheels
Donuts                                         Wheel Spacers                 Steering Hubs  
Fill Caps                                       U-Bends                           Brake Levers
Tube Adapters                             Tabs and Brackets            Motor Plates
                            
                                 Open Pro-werks Catalog

Pro-werks

Items 1 to 12 of 31 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction

Pro-werks Easy Turn 2-3/4 in. Fuel Cell Cap Assemblies with Aluminum 6 Hole Fuel Cell Bung

Starting at:

Starting at: $10.95

2-3/4 in. Fill Cap with Aluminum 6 Hole Fuel Cell Bung, 2-1/4-10 Thread, 6 on 4.438 in. Bolt Circle, 3/4 in. Bung Height. Includes mounting hardware. Learn More...

Pro-werks Easy Turn 2-3/4 in. Fuel Cell Cap Assemblies with Aluminum 6 Hole Fuel Cell Bung

Starting at:

Starting at: $10.95

Pro-werks 4-1/4 in. Fill Caps with Aluminum 12 Hole Fuel Cell Bung, 3-3/4-8 Thread, 12 on 5.343 in. Bolt Circle, 7/8 in. Bung Height. Includes mounting hardware. Learn More...

Pro-werks Easy Turn Cap and Bolt-On Bung Assembly

Starting at:

Starting at: $41.95

Pro-werks Easy Turn Cap and Bolt-On Bung Assembly Learn More...

Pro-werks Easy Turn Cap Weld-In Bung Assembly

Starting at:

Starting at: $30.95

Pro-werks Easy Turn Cap Weld-In Bung Assembly Learn More...

Pro-werks Easy Turn Remote Fill Cap and Bung

Starting at:

Starting at: $33.98

Pro-werks Remote Fill Cap and Bung Learn More...

Pro-werks Easy Turn Fill Caps w/O-Ring

Starting at:

Starting at: $10.95

Pro-werks Easy Turn Fill Caps w/O-Ring Learn More...

Pro-werks Donuts - Mild Steel

Starting at:

Starting at: $47.50

Pro-werks Mild Steel Donuts Stainless Steel DonutsAluminum DonutsMore Pro-werks Products Learn More...

Pro-werks Donuts - Stainless Steel

Starting at:

Starting at: $103.60

Pro-werks Stainless Steel Donuts Mild Steel Donuts Aluminum Donuts More Pro-werks Products Learn More...

Pro-werks Bottle Mounts-Standard

Starting at:

Starting at: $4.73

Pro-werks Standard Bottle Mounts, The diameter listed is the actual bottle diameter. The clamp range is minimal – less than 1/16". To ensure proper fit, measure bottle before ordering. If you wish Learn More...

Pro-werks Bar Mounts

Starting at:

Starting at: $35.93

Pro-werks Bar Mounts, Mount base is 3-1/2" wide end to end and the 1/4" bolt spacing is 2-5/8", measures 1/2" thick. If you wish to see a diagram of an individual piece put the sku into our search Learn More...

Pro-werks Universal Clamps

Starting at:

Starting at: $45.65

Pro-werks Universal Clamps, The base has two 1/4"-20 threaded mount holes with 2-5/8" spacing, measures 1/2" thick. Universal Clamps may be direct flat mounted or accept the popular Pro-werks Bar Learn More...

Pro-werks Bottle Knobs

Starting at:

Starting at: $29.95

Pro-werks Bottle Knobs, 6061-T6 billet aluminum, anodized black, red, blue, or silver, as well as micro-polished aluminum finish. Measure " square drive " on the valve, knobs are available in 2 sizes. Learn More...

Items 1 to 12 of 31 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction